TDS GULL Z single bottle set

TDS GULL Z double bottle set

Description:

The successful TDS Gull first stage can now be bought together with the new reversible Gull Z second stage regulator along with hose and carrying bag.

Features Gull 1st Stage:
 

• First stage manufactured from a block of marine brass which is then chrome plated to increase corrosion resistance.
• Balanced pneumatically compensed diaphragm
• DIN connector that can be used at pressures of up to 300 bar (4350 psi)
• Adjustable intermediate pressure
• Cold or polluted waters kit included
• 5 LP output (low pressure). One on top of the revolving turret, 3/8 ".
• 2 HP outputs(high pressure) 7/16 "
• Adjustable intermediate pressure 0.35 +/- 9.7 bar (140 +/- 5 psi)

Gull Tek Reversible 2nd Stage Features:
 

• Second stage made of chrome plated marine brass and thermoplastic which provide great strength and durability
• Pneumatically compensated
• Lighter than Gull Teksecond stage predecesor
• Heat exchanger that improves performance in cold waters
• Easily replaceable nozzle for optimal fit
• Control Venturi to minimize entry into continuous flow
• Dial for adjusting the inhalation effort
• Reversible mounting from left or right side of the hose

TDS GULL Z SIDEMOUNT Set

Description:

The successful TDS Gull first stage can now be bought together with the new reversible Gull Z second stage regulator along with hose and carrying bag.

Features Gull 1st Stage:
 

• First stage manufactured from a block of marine brass which is then chrome plated to increase corrosion resistance.
• Balanced pneumatically compensed diaphragm
• DIN connector that can be used at pressures of up to 300 bar (4350 psi)
• Adjustable intermediate pressure
• Cold or polluted waters kit included
• 5 LP output (low pressure). One on top of the revolving turret, 3/8 ".
• 2 HP outputs(high pressure) 7/16 "
• Adjustable intermediate pressure 0.35 +/- 9.7 bar (140 +/- 5 psi)

Gull Tek Reversible 2nd Stage Features:
 

• Second stage made of chrome plated marine brass and thermoplastic which provide great strength and durability
• Pneumatically compensated
• Lighter than Gull Teksecond stage predecesor
• Heat exchanger that improves performance in cold waters
• Easily replaceable nozzle for optimal fit
• Control Venturi to minimize entry into continuous flow
• Dial for adjusting the inhalation effort
• Reversible mounting from left or right side of the hose

TDS Proteus

TDS ZERO 5.0 WETSUIT 5 MM MAN

The Zero 5.0 is a one-piece made entirely of 5mm iStretch neoprene with a new composition that makes it much more flexible and lighter, as well as increasing thermal protection. Inside it is combined with Helioflex chest and back panels, this material makes the contact with the diver's skin pleasant and comfortable, while maintaining body heat and providing quick drying.

It incorporates an inner micro sleeve and a new WSS (Water Stop System) neck closure that prevents massive water entry through the neck, the most vulnerable area in wet suits, as well as keeping the zipper secured to prevent unintentional opening. A zipper at the front of the collar makes it easy to adjust and put on.

The ultra-flexible iStretch neoprene makes it easy to put on and move around in and out of the wetsuit before and after the dive.

It incorporates Supratex reinforcements in shoulders and knees, this material does not limit the elasticity of the neoprene. The Zero 5.0 is an ideal choice for divers looking for freedom of movement and protection for a temperate water dive or on liveaboard expeditions, where numerous dives are made per day.

Features:

• 5mm thick 100x100 iStretch 100x100 neoprene.
• High comfort and quick-drying Helioflex inner panels.
• Micro sleeve inside the neck of 1 mm thick.
• WSS collar closure system
• Small front zipper on collar
• Double stitched outer seams
• YKK back zipper that remains covered when suit is closed
• Non-corrosive metal zipper slider
• Supratex shoulder and knee reinforcements
• Heavy-duty plastic logo printing

GULL TAC BLACK FIRST STAGE

Technical Diving System Germany

TDS stages GULL sold separately for experienced divers can mount the necessary settings for your type of diving. But it is essential that they are well trained to use it, because otherwise you may incur a hazard

Description:

TDS GULL stages are sold separately for experienced divers who can set the necessary settings for your diving conditions, but it is essential that divers are well trained in order to reduce risks.

Features:

• First stage machined from a block of marine brass which is then chrome plated to increase corrosion resistance.
• Balanced diaphragm pneumatically compensed
• DIN connector that can be used at pressures up to 300 bar (4350 psi)
• Adjustable intermediate pressure
• Cold or contaminated water kit included
• 4 LP output (low pressure). One on top of the revolving turret, 3/8 ".
• 2 HP outputs (high pressure) 7/16 "
• Adjustable intermediate pressure 0.35 +/- 9.7 bar (140 +/- 5 psi)

 TDS TAC BLACK Oktupus

Description:

The TDS Gull Z is an improved, lighter version of its successful predecessor, the Gull Tek second stage, with an improved lid and a heat exchanger that improves performance, especially in cold water.

The Gull Z is a reversible second stage, which allows the assembly to the hose from the first stage, either by the left or right.
This feature makes it perfect for use in lateral configuration, or sidemount, where one of the second stages, needs to be fed from the opposite direction.

TDS GULL stages are sold separately for experienced divers who can set the necessary settings for your diving conditions, but it is essential that divers are well trained in order to reduce risks.

Features:
 

• Second stage made of chrome plated marine brass and thermoplastic which provide great strength and durability

• Pneumatically compensated
• Lighter than the previous version of the Gull Tek
• Heat exchanger improves the performance, especially in cold water.
• Easily replaceable nozzle for optimal fit
• Control Venturi to minimize entry into continuous flow
• Dial for adjusting the inhalation effort
• Reversible mounting from left or right side of the hose

TDS XTREM DECO BOY SMB

Description:

Red, 150 cm, TDS surface marker buoy SMB. The inflation is realized by plastic valve with a bc hose, wing hose, or dry suit hose. Also allows for buccal inflation.
Thanks to its closed system, the air remains in the interior, preserving the shape of the buoy, keeping it erect and comletely inflated on the surface.
It's also possible to use as a bouyancy emergency element on the surface.

Several security systems are included, such as an overpressure valve to prevent bursting and to allow for comfortable deflation, anti-lock connector for bc hose, reflective strips on both sides and a wet note zone in upper zone to send messages to surface.

The entire buoy folds over itself and is fastened with a rubber band to prevent it from loosening, and facilitating transport in very little volume.

Features:
 

• Lenght: 150 cm
• 400 D Nylon
• Thermosealed closure system
• Black reinforcement ribbon around the perimeter
• Metalic inflation valve with anti-block plug for bc hose
• Drain and overpressure valve with cord
• Solas Reflective bands in both sides
• Bungee to keep the buoy folded and facilitate transport
• Wet note zone in upper side to send messages to surface

TDS BOYA DECO TEK ADVANCED C/PIZARRA

TDS UNDERSUIT SVALBARD THINSULATE